Since they are pricey systems, learning how to clean a PS4 could seem frightening, but it is very doable. Many of us are still reliant on the PS4 for high-quality gameplay with some of the finest PS4 games because of the PS5 resupply concerns.
The PS4, on the other hand, has been around for a long, so if your console is older than a year, it probably has some dust inside and out. Overheating might result from this, which is not ideal while you’re playing one of your favorite games.
Therefore, the dust needs to be cleaned off. The issue is that you must disassemble a PS4 in order to completely clean it, and that poses problems. You risk damaging the PS4’s internal components or improperly reassembling it. But because of some dust, you shouldn’t have to put up with your PS4 performing unevenly.
To assist you, we’ve put up a guide that walks you through each step of what to do to get your PS4 back to 100% performance and dust-free. Here’s a guide that will teach you How To Clean PS4 Without Cracking.
How To Clean PS4
Before we walk you through the processes, it’s important to note that the warranty will be voided the moment you begin disassembling your PS4 to clean the inside. Therefore, rather than cleaning your PS4 yourself if it overheats inside the warranty time (which is often a year), call customer support.
Additionally, you should be aware that the procedures vary depending on whether you have a PS4 original, PS4 Slim, or PS4 Pro. Additionally complicating matters is the existence of a second, slightly altered PS4 that was produced after September 2015.
The stages for the additional models are highlighted where they change from those seen in the images, which are for the first original model.
- To begin with, ensure sure your PS4 is off and that all wires are unplugged from the console.
- Next, clean the exterior of the PS4. Spray quick bursts of compressed air into the vents, front and back ports, and wherever in between with your compressed air can. To avoid spraying moisture into the PS4, keep the can upright and at a safe distance while spraying.
- After that, wipe your PS4’s surfaces clean with a dry microfiber cloth to remove any noticeable dust. Use this towel to clean the surface and the space surrounding your PS4 while you have it available. This removes any possible dust that your PS4 could gather after being put back in place.
- Cleaning the internals is the next challenging step. Make sure you have a clear area to work in and a decent source of light so you can see what you’re doing.
- If you have an original PS4 and this is your first time cleaning it, you will need to remove the warranty stickers off the back, not the least since you will need to remove the screws that are securing them. Keep in mind that contacting customer care is preferable to cleaning the internals yourself if it is still covered under warranty. It shouldn’t require cleaning if it’s still covered by the guarantee.
- If you have the original PS4 seen below, you should be able to see four screws on the console’s back, just below the warranty stickers. Once they are carefully kept together, put them away.
- Only one sticker and one screw are included on subsequent original PS4 models. There are no screws if you have a PS4 Slim or PS4 Pro.
- If you have one of the original PS4 models, you must flip it over so that its top is laying on the ground. By pushing the corners and edges away, you should be able to remove the console’s base; this may need some effort, but don’t push too hard.
- Keep the PS4 Slim or PS4 Slim upright while you carefully peel the outer case off the front of the system.
- Carefully use your microfiber cloth to remove any dust from the case’s interior before putting it aside. A picture of the PS4 reveals the soiled case.
- At this point, you should be gazing at a sizable metal plate from the top if you have a later model of the PS4. If you have an original console, you can see the fan and a combination of the power supply and plastic case at the base.
- To remove dust, lightly push your finger on the center of the fan to hold it in place. Then, spray the fan with compressed air a few times. It’s crucial that you leave the fan in place during this operation since turning it on by force can harm the hardware.
- To access the metal plate at the rear of the PS4 Slim and Pro, you must pry open the plastic casing using a Phillips screwdriver. The smaller metal plate should now be visible. Utilizing your T8 or T9 screwdriver, remove this as well.
- At this point, you ought to be staring at the whole metal plate that dominates the surface. This is secured with screws; remove them by carefully lifting the object away.
- In order to completely examine the internals of a PS4 original console, you will need to remove the power supply. Simply unscrew the five screws then carefully pull the device out and lay it aside, taking care not to yank the power cable.
- Regardless of the console you own, you should now be able to inspect the whole internals of your fan. Use pressurized air to gently and carefully spray the dust away from the components in small bursts, but be sure to momentarily tuck something inside the fan, such as a cotton swab, to stop it from spinning. Direct the airflow such that it sweeps dirt up and away from the fan and its components. It’s also a good idea to aim for the heatsink.
- After roughly an hour, let the console air-dry before putting it back together.
Your PS4 should now function much more quietly and smoothly. Remember to frequently clean the space where it sits to prevent dust from collecting too rapidly.
PS4 dust prevention
Preventing dust from gathering in the first place is the simplest approach to keeping your PS4 secure and keep clear of any harm. Placement is important in this situation. Your PS4 should be raised and placed in a cool, clean spot, not on the carpet or the floor where creepy crawlies might readily settle in.
Also needing room to breathe is the PS4. The console should ideally be placed away from the wall, preferably in the open, and without much clutter in its immediate vicinity. The input ports may draw in more air and you’ll have a lot simpler job cleaning if the region is largely free of stray objects.
The most apparent option is to place your PS4 on a TV stand or desk, although entertainment centers are also acceptable. Just make sure the console isn’t locked inside a cabinet and is instead placed in a ventilated cubby. Always leave the doors open while playing if you must keep your PS4 in a cabinet so that heat may escape.
Will opening my PS4 void the warranty?
The first-generation PS4’s warranty would be voided if the casing were opened using tools. With the most recent PS4 Slim and PS4 Pro models, Sony has simplified the process of disassembling the system.
The top cover can now be removed by hand without the need for any tools, allowing you easy access to the fan. This implies that opening the PS4 to clean the fan will no longer breach the warranty, thus there is no reason why you can’t give your system a thorough cleaning.
Verdict
PS4 is one of the most popular gaming consoles that people use to play games in their free time. Dust is the reason behind the reduced age of any electronic item. So keep your console dust free and you are good to go. Your PS4 console will survive more as compared to consoles with dust.
We hope that the article might be helpful for you and that you learned How To Clean PS4 Without Cracking it. If you still have any doubts then comment below and share the article with your friends. For more interesting articles bookmark the website.